Description
Specifications and application matching
Match 3147 Rack & Pinion 14′ Steering Unit 5/8 x 36 Spline Rock Crawler Sand Rail within Complete Units by the recorded specifications rather than the product name alone. Primary match point: Shaft: 5/8 inch diameter with 36 splines.
Secondary technical evidence: 36 Spline 5/8″ Diameter Shaft. A further identifier or specification to verify is: Material: Aluminum housing.
Technical verification
Compare the stated identifiers, dimensions, material, option, and application details with the item being replaced before ordering.
Complete source-backed product details
RACK AND PINION UNIT
EMPI 00-3147-0 is a Rack and Pinion Steering Unit designed for off-road vehicles like rock crawlers and sand rails.Key Features:
- Material: Aluminum housing.
- Compatibility: Suitable for lightweight vehicles, including dune buggies and sand rails.
- Dimensions: 14 inches wide from hole to hole.
- Shaft: 5/8 inch diameter with 36 splines.
- Mounting Holes: Four mounting holes with a spread of 2-1/4 inches on the outer ones and 1-3/4 inches on the inner ones.
- Function: Provides precise steering control with 1-1/2 turns lock to lock.
- Special Features: End load design.
This rack and pinion unit is ideal for those looking to upgrade their off-road vehicle’s steering system for better performance and control.
3147 – 14″ Rack & Pinion Unit – 5/8 – 36 Spline.
Source product highlights
About this item
- 36 Spline 5/8″ Diameter Shaft
- End Load Rack & Pinion
- Aluminum Material
Jojo –
Beautiful , Rugged and smooth. , easy to mount. Looks great , works greatThank you very much !Doc…
Bradley –
Very smooth and no end play at all. Very strong rack and pinion when building your own setup
Just_Nuts_and_Bolts –
I am using this in an FSAE car that I autocross.There is a lot of play inside the rack that makes it hard to control the car.Coming from a Stiletto rack, this rack is pretty much useless.
Wayne –
Other than a few manufacturing blemishes in the housing everything seems to be working correctly. Installing on an offroad buggy build so perfect finish wasnt required. Will work perfectly for my application
Adrian –
es mucho mas pequeño de lo que aparenta, no es robusto, no parece para uso offroad. las terminales no se pueden girar para ajustar el angulo
Kurt Zeisler –
first off this thing is tiny, I bought it for a go kart, and its perfect but Id never use this on a rail buggy, its signifcantly smaller than a polaris rzr rack, which isnt exactly big. That being said it is super nice, the machining looks top notch, nice real lip seals on the steering shaft, zero play in the rack, easy to turn with you fingers with no spots that bind. if you want a good quality small rack this is it, if your looking for something for a dune/rail buggy Id say no.
Jim –
My original rack was only mounted with 2 bolts. I hit a rock. Might have broken it!I mounted the new one with 4 grade 8 bolts and a steel washer plate. The holes are for 5/16 bolts but are very close together. I used hex drive (Allen head) and made a nut plate for the back. Not enough room for standard hex nuts when using all of the bolts.
JohnBlaso –
no free returns, false advertising